Installing carbon monoxide detectors could save you from a colourless, odourless killer.Carbon monoxide poisoning kills an estimated 30-50 people each year in the UK.
And many more are injured or become seriously ill from unknowingly inhaling this colourless and odourless gas.
Installing carbon monoxide detectors, and ensuring it is in the right place.
Your carbon monoxide alarm isn’t a replacement for a standard smoke alarm.
You’ll need one of each or a combined alarm. Carbon monoxide is produced when gas appliances.
Such as boilers, built-in ovens or freestanding cookers, aren’t fully burning their fuel. This usually happens if they have been incorrectly or badly fitted.
Not properly maintained and serviced, or if vents, chimneys or flues become blocked.Gas appliances should be installed by a professional Gas Safe registered engineerIt’s not just gas-burning products that can pose a carbon monoxide risk.
Any product that burns oil or solid fuel, paraffin, coal, wood and charcoal.
Will produce carbon monoxide.
But there are ways to spot a potential risk.
Along with fitting a carbon monoxide detector see below.
The Gas Safe Register has identified some tell-tale carbon monoxide signs:Yellow or orange cooker flames – gas flames should be crisp and blue.Soot or yellow-brown staining around or on appliances. Inconsistent boiler pilot lights that frequently blow out.More condensation inside windows than usual.If you think your boiler or oven is showing signs of carbon monoxide.
Early symptoms of carbon monoxide poisoning are similar to early flu.
Including tiredness, nausea, an upset stomach and flu-like symptoms.
The NHS Choices website has further details of potential carbon monoxide poisoning.
And the symptoms to look out for.
If you feel unwell and suspect carbon monoxide poisoning, go to your doctor.
Call NHS 111 (where available) or, if it’s urgent, phone 999 for an ambulance.
Tell them you feel your symptoms may be related to carbon monoxide poisoning.An audible carbon monoxide alarm is a good way to ensure you’re immediately alerted.
To any carbon monoxide in your home.Carbon monoxide detectors are widely available from DIY stores.
Usually found in the smoke alarm aisle, from supermarkets, or through your energy supplier. Your carbon monoxide detector should:Have an audible alarm – rather just than a ‘colour change’ or ‘back spot’ indicator tool.
Which will sound an alarm when it detects COHave a British Standard EN 50291 mark – also written as BSEN 50291 or shown with the CE mark.
A British or European Kitemark.
Loss Prevention Certification Board (LPCB) or equivalent testing approval mark.Carbon monoxide detectorA carbon monoxide alarm is cheap and easy to fit.Setting up and installing your carbon monoxide detector is a straightforward DIY task.
Simply follow the detector’s instructions. You should also:Install a carbon monoxide detector in every room containing a fuel-burning appliance.
Always read and follow the manufacturer’s instructions on siting.
Testing, servicing and replacing the alarm.
Pay particular attention to the unit’s battery life and when it will need replacing.Position the alarm at head height (your breathing level).
But it doesn’t need to be fixed to a wall a shelf is often suitable.
The alarm should be at least 15cm from the ceiling.
Place the alarm at least a metre away from boilers, fires, cookers or heaters.
Ideally in the same room as the appliance.
Though not directly above a source of heat or steam.Test your alarm regularly using the test button.
And replace batteries annually or when the low battery signal sounds.
Protecting your home and family from carbon monoxide poisoning.
This is a three-stage journey that includes buying.
Installing and regularly servicing your gas appliance.
Protecting your home from carbon monoxide poisoning.
This begins the moment you get your new appliance home.
It’s important to find a reliable professional with Gas Safe Register accreditation.
To install any new gas appliance.
As they can legally and safely undertake gas safety work.Find recommended engineers in your area on the Gas Safe Register website.If you’ve recently had home improvement work done that involved gas.
And you’re not sure if a registered engineer did the work.
you can nominate your property for a free safety check. Your gas supplier may be able to provide you with a free gas safety check if you meet certain criteria.
Such as being of pensionable age or chronically sick or disabled. For solid fuel and Biomass appliances, choose a HETAS approved engineer to install your appliance.ServicingGetting a good boiler or gas appliance service every year.
This will help to ensure they are functioning as they should be.A HETAS-registered installer can service and clean solid fuel and Biomass appliances.
And a HETAS-approved chimney sweep can help keep your chimney clear.Gas suppliers have a duty to provide free annual gas safety checks to some older disabled or chronically sick people or those who live with them, or with a child under five.
Like to know more about how Duval Heating can help you with your boiler and heating problems, even book an appointment for one of our engineers to call on you. Use our Contact page
01473 806 100
Duval Heating 1985 - 2019