As a homeowner, you know keeping up with home maintenance and plumbing problems can sometimes feel like a full-time job. There are many things that need to be done to a home in order to keep it running smoothly.
Plumbing is just one of the many aspects of your home that you have to keep up throughout the year. Below you will find a helpful checklist that will help you to look for plumbing problems as well as potential plumbing problems that should be addressed before they become a real issue.
Going line-by-line on the checklist will help you with preventative care and maintenance of your home’s plumbing.
When thinking about your plumbing system, you need to first realize the number of appliances and pipes that are included in the system. This doesn’t only cover the plumbing system that operates toilets, sinks, showers, and baths in your home, it also covers laundry facilities in your home for your washing machine, utility sinks, and drains that may be installed.
1 Look for signs of leaks in any exposed pipes, where pipes run through the walls or the foundation of your home. Signs of a leak include puddles of water and watermarks also scale growing on or around the pipe.
2 Look for signs of corrosion. Corrosion of pipes can cause leaks and bad pipe connections if not corrected quickly. A sign of corrosion is green stains around brass and copper fittings and on isolating valves, and yellow or orange stains on old steel pipe.
3 Test the water pressure. Water pressure is with how much force the water comes out of sink taps and showerheads. Low water pressure can be a sign of sediment or scale build up in the taps or shower head. It may also be a sign of a problem with the water pipes.
4 Remove the showerhead to look for any scale that may have collected in it. This may be a cause of lower water pressure.
5 Check each sink, shower and bath drain for the speed of water flow. Slow flowing water usually indicates a clog up in the drain or a blocked vent pipe. Your drains should have a full swirl when draining. If bubbles appear when water is draining, this is usually a sign of a problem. If there are gurgling sounds, there may be venting problems
6 Check the flushing handle and inside parts of your toilets. Flush each toilet to make sure that it is flushing properly. Check the parts inside the tank of the toilet to see if any parts are broken, rusted, or missing. Make sure the toilet water does not continue to run after flushing and make sure there is no sign of water on the floor around the toilet.
7 Look for cracked tiles in the shower, around sinks, or near water pipes in the home. Loose or hollow tiles can be an indication that there is, or was, a leak that has caused rotting underneath or behind the tile. Water that goes through the cracks will look like a plumbing leak on the ceiling below.
8 See if the bath, shower, sink or toilet mastic is coming away.
Check for mildew, which is caused by standing water that may have dried up again.
9 Push and pull gently on each toilet to see if it rocks or moves.
10Look inside the burner chamber of your home’s water heater or boiler if you can. See if there are any flakes of rust around your boiler case. Also, check the flame of the boiler, which should be a blue colour with no signs of yellow in the flame. If you see a yellow colour, this may mean that the Jets need to be cleaned, and you need to call your local gas safe engineer.
11You should drain the boiler to remove sediment that may have built up inside and flush out the full system then refill with an inhibitor
12 Turn on all of the taps in your home to see if there is any water coming out of the handles and valves.
13 Check the washing machine hoses to make sure that there aren’t any cracks and that the hoses are not brittle or leaking. Washing machine leaks are common insurance claims. The best hoses are braided stainless or other high-pressure material.
By running through this checklist on an annual or bi-annual basis, you can check your home for plumbing problems or potential plumbing problems. Addressing these problems on a regular basis can help you to prevent the problems from becoming worse, which can save you quite a bit of money in the long run. Therefore, taking a few minutes to inspect your plumbing system is time well spent.
If you are not sure on how to carry out this these few simple tips, then the best advise I can give you is to contact your local plumber, and for a small fee, he can check your plumbing, giving you some peace of mind the plumbing is ok. Many people tend to leave these simple checks that then turn into big problems and cost…